Meizu
has held a new conference on July 19, the annual heavy model -- Meizu
MX6 has formally met with us. On the fuselage design and the material
selection of the MX6, it inherites the high-end model of Meizu PRO 6's
top selling point. Moreover, it has become the world's first model with
Sony IMX386 sensor.
Meizu
MX6 adopts CNC Uni-body full metal design, with magnesium alloy
material, CNC machining, PBT nano-injection molding and precision
grinding and other procedures. Phone thickness is 7.25mm (Meizu MX5 is
7.6mm). The whole mobile is featured with arc design and large R angle.
MX6
still using Meizu unique arc antenna. In speaker, microphone, volume
and flash and other places, MX6 has been dealt with high light chamfered
to enhance the feel, the visual effect is also much better.
Meizu
MX6 has also made a great change on the Hardware performance. It uses
MediaTek Helio X20 deca core processor, energy consumption ratio further
improved. Mali T880 GPU, compared to Mali T760 GPU, performance has
been improved 180%. Memory combination is 4GB RAM + 32GB ROM.
500
million pixels front camera, uses OV 5695 sensor, the same F2.0
aperture as the rear camera, support intelligent beauty and facial
exposure enhancement algorithms.
The
rear camera is one of the biggest breakthroughs in the Meizu MX6, which
is the world's first mobile phone that uses Sony Exmor RS IMX386 stack
sensor. 12 million pixels, the unit pixel size reaches up to 1.25μm,
integrated with high-density phase detection pixels, both the low-light
shooting performance and focus speed have been improved. 6P lens group
design have a good ability of anti-glare.
MEIZU
MX6 support 24W charging power, the mCharge technology, in theory, 10
minutes can be filled with 25%, and 75 minutes can be filled with the
full cell phones. Whilw under the five hours of battery life test, it
still have 45% power, and the battery capacity of 3060mAh.
As
for the network, it supports dual Nano SIM card dual standby and VoLTE
calling plan, which is sure to promote the voice call quality.
Meizu
MX6 Smart Phone is equipped with a 5.5 inch 1080P screen, and first
adopts the TDDI one touch display technology, which integrate the touch
and display drivere in a single chip to reduce the power consumption
while enhance the display effect. The screen uses the Full incell
technology, two touch built into the LCD screen, making the touch
performance a great improvement.
GF5116M
full new fingerprint identification module is also integrated on the
Home key. In theory, unlock speed can reach 0.2s. Moreover, the surface
is covered with high hardness of composite materials, which can improve
the wear resistance. On Fingerprint payment, Meizu MX6 supports Both
micro-channel and Alipay, and the fingerprint data has been dealt with
chip-level encryption.
Meizu
MX6 adopts CNC Uni-body full metal design, with magnesium alloy
material, CNC machining, PBT nano-injection molding and precision
grinding and other procedures. Phone thickness is 7.25mm (Meizu MX5 is
7.6mm). The whole mobile is featured with arc design and large R angle. MX6
still using Meizu unique arc antenna. In speaker, microphone, volume
and flash and other places, MX6 has been dealt with high light chamfered
to enhance the feel, the visual effect is also much better.Meizu
MX6 has also made a great change on the Hardware performance. It uses
MediaTek Helio X20 deca core processor, energy consumption ratio further
improved. Mali T880 GPU, compared to Mali T760 GPU, performance has
been improved 180%. Memory combination is 4GB RAM + 32GB ROM.500
million pixels front camera, uses OV 5695 sensor, the same F2.0
aperture as the rear camera, support intelligent beauty and facial
exposure enhancement algorithms.The
rear camera is one of the biggest breakthroughs in the Meizu MX6, which
is the world's first mobile phone that uses Sony Exmor RS IMX386 stack
sensor. 12 million pixels, the unit pixel size reaches up to 1.25μm,
integrated with high-density phase detection pixels, both the low-light
shooting performance and focus speed have been improved. 6P lens group
design have a good ability of anti-glare.MEIZU
MX6 support 24W charging power, the mCharge technology, in theory, 10
minutes can be filled with 25%, and 75 minutes can be filled with the
full cell phones. Whilw under the five hours of battery life test, it
still have 45% power, and the battery capacity of 3060mAh.As
for the network, it supports dual Nano SIM card dual standby and VoLTE
calling plan, which is sure to promote the voice call quality.Meizu
MX6 Smart Phone is equipped with a 5.5 inch 1080P screen, and first
adopts the TDDI one touch display technology, which integrate the touch
and display drivere in a single chip to reduce the power consumption
while enhance the display effect. The screen uses the Full incell
technology, two touch built into the LCD screen, making the touch
performance a great improvement.GF5116M
full new fingerprint identification module is also integrated on the
Home key. In theory, unlock speed can reach 0.2s. Moreover, the surface
is covered with high hardness of composite materials, which can improve
the wear resistance. On Fingerprint payment, Meizu MX6 supports Both
micro-channel and Alipay, and the fingerprint data has been dealt with
chip-level encryption.
No comments:
Post a Comment